Gardner ATTs Underlit Wheel Alarm

Gardner ATTs Underlit Wheel Alarm - BITE ALARM

The ATTs Underlit Wheel Alarm is specifically designed for use with the V2 ATTx Receiver. This bite alarm lacks a speaker, and bite indications are sent directly to the receiver unit. It features a built-in wireless transmitter, ensuring a link between the alarm and the central unit. The LED position is set beneath the wheel, illuminating the roller on a bite. The alarm has a soft, rubberized matte finish housing. An integrated transmitter is compatible with the ATTs Receiver (alarms must be programmed into the V2 ATTs Receiver, which will then provide sound and vibration alerts upon a bite). The alarm has no knobs or buttons, enhancing its reliability and making it waterproof. The included "intelligent protective cover" acts as an on/off switch - simply remove the alarm from the case to turn on the ATTs. The Low Battery Warning system alerts when battery levels are low. The alarm is equipped with a high standard of digital circuits for total reliability and performance. It comes with a black wheel with 2 magnets as standard. Betalight sockets are located in each snag ear (dedicated "ATTS Tritium Max" betalights are sold separately).

Standard with the alarm, you get a roller with two magnets (rollers with 4 or 6 magnets can also be purchased separately):

• Wheel with 2 magnets - the receiver emits an audible signal for every 1 cm of line movement.
• Wheel with 4 magnets - the receiver emits an audible signal for every 0.5 cm of line movement.
• Wheel with 6 magnets - the receiver emits an audible signal for every 0.33 cm of line movement.

Specifications:

• Soft-touch, matte, rubberized finish casing
• Roller illumination upon a bite
• Built-in transmission compatible with the V2 ATTx and Deluxe receivers (alarms must be programmed into a compatible receiver that provides all sound and vibration indications).
• No buttons or knobs enhance reliability. Instead, the ATT heads standardly use an "intelligent" hard protective cover, which acts as an on/off switch for your ATTs, shutting off the battery when applied. The alarm turns on upon removal of the cover.
• All ATT heads are 100% waterproof! The absence of buttons, jack sockets, and speakers reduces the risk of water ingress and electronic damage.
• Rods are held by high, parallel 'ears' of the alarm, preventing the loss of a rod during sideways takes.
• ATTs have a system to prevent false bite indications.
• The ATT alarm is equipped with high-standard digital circuits, ensuring complete reliability and performance.
• An integrated low battery warning system signals the ATTx receiver, which emits an audible alert to warn the user of low battery status on any ATT head (a series of audio signals registered on the receiver's channel).
• Betalight socket on each ear for dedicated ATT Tritium Max Betalight isotopes 6 mm x 2 mm (not available for the European market).
• Brass 3/8 BSGF buzzer bar thread and locking nut, both corrosion-protected
• High-quality electronics enable a range of up to 600 meters between the alarm and receiver (in ideal terrain and weather conditions)
• Ultra-compact and lightweight.
• Comes with a free standard test battery included.

One-year warranty

Dimensions: 64mm x 34mm x 21mm

Available in a wide range of colors: White, Red, Green, Purple*, Yellow, Blue, Pink

*Purple ATT heads are equipped with a true purple LED, which has a lower light intensity than other colors in the series.

Dimensions: 64mm x 34mm x 21mm

Tips for caring for your ATT bite alarms:

• Clean and thoroughly dry your alarms before storing them in a dry place.
• We recommend keeping the alarms in a warm place (or at least at a stable temperature) to avoid heating and cooling, which can cause condensation.
• If the alarms are not going to be used for an extended period, we strongly recommend removing the batteries. Battery leaks are not covered by the ATT warranty.

Tag: Alarm, Alarms, ATTs, Bite, Gardner, Indicator, Individual, Underlit, Wheel