Fox Micron RX Plus Bait Alarm

Fox RX+ Bite Alarm

Weatherproof sealed casing
Integrated circuits
D-Tec™ Plus Sensing System (DTSS)
Low power consumption
CNC machined Tru-Run™ roller wheel
Dual multicolour LED indicators (colours include red, green, blue, orange, purple, and white)
Switch with two operating modes (day and night mode)
In night mode, both LEDs emit a gentle glow in the selected colour
High-quality cone speaker
Robust 3/8" stainless steel thread
Rubber inserts to protect your rod
Step-by-step, ergonomic volume control (8 different volume levels, with the lowest setting turning off the sound)
Step-by-step, ergonomic tone control (8 different tone settings: turn the knob clockwise to raise the tone and counterclockwise to lower it)
Step-by-step, ergonomic sensitivity adjustment with swing elimination (8 different sensitivity settings - see the sensitivity table below compared to the NTX-R alarm)
Range test function allows checking the reception by the RX+ Receiver of the signal from the RX+ Alarm at a given distance
Low battery warning (LED changes to turquoise, indicating the need to replace the battery)
Voltage output socket (2.5mm) for connecting Illuminated swingers
Includes two types of spacers: hard and soft, with additional spare soft spacers
Operates on 2 AA batteries

Enhanced features compared to the NTX-R alarm

Deeper rod-protecting prongs without increasing the height of the alarm
Dual multicolour LEDs, one on each prong, positioned at the ends of the prongs
External control over the multicolour LEDs with Colour Sync™ function - just change the LED colour via a button on the battery cover
Manually adjustable day and night mode
External Vari Bright LED brightness control to match existing conditions (choose from 3 LED brightness settings for day mode and 3 different settings for night mode). Simply press the button on the battery cover
Increased space around the roller and improved water drainage significantly reduces the risk of roller freezing at very low temperatures
Greater range of the RX+ Receiver
Improved sensitivity range (see below)

Sensitivity adjustment

In all sensitivity settings (except maximum), to activate the device, the line must travel the required distance in the same direction within 2 seconds. Any movement in the opposite direction resets the distance counter to zero. This is significantly designed to reduce or eliminate false alarm activation caused by wind and water movement.

RX+ line movement NTX-R line movement

Setting 1 (Min) 90mm 74mm

Setting 2 73mm 56mm

Setting 3 56mm 48mm

Setting 4 34mm 40mm

Setting 5 17mm 32mm

Setting 6 11mm 24mm

Setting 7 5.6mm 16mm

Setting 8 (Max.) 2.8mm 8mm

Downloads:

Micron RX+ Receiver User Manual

Micron RX+ Bait Alarm User Manual

Tag: Alarm, Alarms, Bait, Bite, Fox, Individual, Micron, Plus